P0138 means the downstream O2 sensor is reading high voltage. UK repair costs, causes and fixes for OBD2 fault code P0138.
This page explains the code in plain English and gives indicative UK repair and MOT context. It does not confirm the exact failed part. Vehicle age, engine, related codes, live data, and workshop inspection can all change the final diagnosis and quote.
P0138 means the downstream O2 sensor is reading high voltage. UK repair costs, causes and fixes for OBD2 fault code P0138. When this fault is detected, the ECU (Engine Control Unit) stores the code and usually illuminates the check engine light on the dashboard.
In practice, P0138 should be treated as a oxygen sensor and catalyst monitoring problem first, not as proof that one named part has failed. The value of the code is in narrowing the system, checking related data, and avoiding the usual misdiagnosis before parts are ordered.
The primary symptom is an illuminated check engine light (malfunction indicator lamp) on your dashboard. Depending on the severity of the fault, you may also experience rough running, reduced fuel economy, or changes in engine performance. Some vehicles show no drivability symptoms at all — the warning light may be the only indication of a problem.
Fault code P0138 is triggered when the vehicle's ECU detects a reading or performance level outside the expected range for that system. P0138 means the downstream O2 sensor is reading high voltage. UK repair costs, causes and fixes for OBD2 fault code P0138. Common causes include sensor failure, wiring faults, mechanical issues, or secondary faults caused by another problem elsewhere in the vehicle. A full diagnostic scan should always be carried out to check for related fault codes before any parts are replaced.
The repair approach for P0138 depends entirely on the root cause identified during diagnosis. Always start by scanning for any related fault codes that might indicate the primary fault. Check wiring and connectors before replacing sensors or components. If the fault is sensor-related, replacement is usually straightforward. If the fault indicates a mechanical issue, a qualified mechanic should assess the vehicle before any work is carried out. After any repair, clear the code and road test to confirm the fix.
The typical UK cost to diagnose and repair fault code P0138 ranges from £50 to £250 including parts and labour at average UK workshop rates, including VAT. Costs vary significantly by vehicle make and model, and by region. Independent garages are typically 30–50% cheaper than franchised main dealers. Always get at least two quotes, and ask the garage to confirm the fault cause before authorising any repair.
P0138 is part of the oxygen-sensor family, so the fault may involve sensor output, heater operation, or wiring integrity around a very hot part of the exhaust. On UK cars these faults often show up as emissions issues, poor economy, or catalyst-monitoring warnings rather than major drivability problems.
The common mistake with P0138 is replacing the sensor without checking the circuit. Heat damage and wiring faults often mimic a failed lambda sensor.
Fault code P0138 is likely to cause an MOT failure. Under current DVSA testing standards, an illuminated malfunction indicator lamp (MIL / check engine light) is an automatic MOT failure, regardless of whether the vehicle is otherwise roadworthy. This means you must resolve this fault before your MOT test.
Even if the light is not currently on, if the fault is intermittent it could reappear during the test. Use our AI Diagnostic Report to understand the MOT risk specific to your vehicle and get advice on whether it is safe to proceed to your test.
Specific to your vehicle — year, make, model and engine.
Includes step-by-step repair guide, exact UK labour costs and MOT impact.
Can I drive with fault code P0138?
Driveable short-term but fix before your MOT.
Will P0138 clear itself?
Some fault codes will clear automatically after the underlying issue resolves itself, but P0138 typically stays stored until the fault is fixed and the code is manually cleared with an OBD-II scanner. Do not assume the problem has gone away if the light turns off temporarily.
Do I need a garage or can I fix P0138 myself?
Whether P0138 can be fixed at home depends on the root cause. Sensor replacements are often achievable for confident home mechanics. Mechanical or electrical faults usually require specialist tools and knowledge. Always get a full diagnosis before attempting any repair.
How much does it cost to fix P0138 in the UK?
UK repair costs for P0138 typically range from £50 to £250 depending on your vehicle, the root cause, and your local garage rates. Use our AI Diagnostic Report for a cost estimate specific to your car.
Last updated: June 2026. AI-Diagnostics-Pro provides AI-generated information for educational purposes only. It is not a substitute for professional automotive advice. Always consult a qualified mechanic before carrying out vehicle repairs. Repair cost estimates are approximate and may vary by region and vehicle.
