P0345 indicates camshaft position sensor a circuit (bank 2). Start with the sensor or circuit the code names, then rule out the air, fuel and mechanical faults that commonly mimic it before replacing parts.
AI-generated guidance for UK drivers. It is educational guidance for P0345, not a substitute for live data, workshop testing, or a final quote. Always confirm with a qualified mechanic.
This page explains the code in plain English and gives indicative UK repair and MOT context. It does not confirm the exact failed part. Vehicle age, engine, related codes, live data, and workshop inspection can all change the final diagnosis and quote.
P0345: Bank 2 camshaft position sensor signal invalid, causes hard starting or misfires. Check wiring and connector first (£60-£300). When this fault is detected, the ECU (Engine Control Unit) stores the code and usually illuminates the check engine light on the dashboard.
Before any parts are ordered: Confirm whether P0345 is a cylinder-specific or random misfire and check freeze-frame data.
These are the most common symptoms UK drivers report when this code is active:
Note that some vehicles show no drivability symptoms at all — the check engine light may be the only sign. This is why scanning the fault code is essential rather than guessing at the cause.
These are typical causes to check first:
It is important to diagnose the root cause before replacing parts. Many unnecessary and expensive repairs happen because the most expensive component is replaced first without proper testing. Always work through the diagnostic steps systematically.
Work through these steps in order to avoid unnecessary parts replacement:
After any repair, clear the fault code with an OBD-II scanner and carry out a test drive. If the code returns, continue to the next diagnostic step. For a personalised repair guide specific to your vehicle's make, model, year and engine, use our AI Diagnostic Report below.
These models are frequently seen with this fault code in UK garages:
This code can appear on OBD-II compatible vehicles. OBD-II is standard on most UK petrol cars from 2001 and diesel cars from 2004, with many later-1990s vehicles also compatible. The models listed above are examples where owners and garages often encounter this fault, but they are not an exhaustive or ranked list.
Difficulty: Medium — Bank 2 sensor may be harder to access on V-engines.
UK repair cost estimate: £60–£300 including parts and labour at average UK workshop rates (inc. VAT). Independent garages are typically 30–50% cheaper than main dealers. Always get at least two quotes.
Prevention: Change engine oil on schedule, keep connectors clean.
P0345 is commonly the Bank 2 cam sensor fault on engines with multiple banks. That means location matters, and comparisons between both banks are useful during diagnosis.
The common mistake is working on the wrong bank or wrong cam because the engine layout was assumed.
Fault code P0345 does not directly cause an MOT failure on its own, but it can still cause a failure if it keeps the check engine light (MIL) on where MIL inspection applies, or affects emissions.
Even if the light is not currently on, if the fault is intermittent it could reappear during the test. Use our AI Diagnostic Report to understand the MOT risk specific to your vehicle and get advice on whether it is safe to proceed to your test.
Useful UK sources for further reading:
Repair cost estimates are indicative ranges for UK independent garages, based on typical UK labour rates and parts prices; your quote will vary by vehicle, location and garage. All content is for educational purposes and is not a substitute for professional mechanical diagnosis.
Specific to your vehicle — year, make, model and engine.
Includes step-by-step repair guide, exact UK labour costs and MOT impact.
What does P0345 mean in plain English?
P0345 indicates camshaft position sensor a circuit (bank 2).
Will P0345 fail an MOT?
An active misfire code commonly goes with an illuminated engine management light and poor emissions, both of which are bad news for an MOT. Fix the underlying cause and complete a proper drive cycle before test day.
Can I keep driving with P0345?
Drive with caution — cam sensor faults can cause stalling and hard starting.
How much does it usually cost to fix P0345 in the UK?
Typical UK repair costs for P0345 range from £60–£300, depending on the underlying fault, your exact vehicle, and local labour rates.
Use these supporting pages to compare likely repair paths, warning-light behaviour, MOT risk, and the questions to ask before approving work.
Compare P0345 with closely related faults, nearby codes in the same family, and adjacent module or sensor faults that often need to be ruled out during diagnosis.
Last updated: 22 July 2026. AI-Diagnostics-Pro provides AI-generated information for educational purposes only. It is not a substitute for professional automotive advice. Always consult a qualified mechanic before carrying out vehicle repairs. Repair cost estimates are approximate and may vary by region and vehicle.