P0306 indicates a misfire on cylinder 6. UK repair costs, causes and fixes for OBD2 fault code P0306.
This page explains the code in plain English and gives indicative UK repair and MOT context. It does not confirm the exact failed part. Vehicle age, engine, related codes, live data, and workshop inspection can all change the final diagnosis and quote.
P0306 indicates a misfire on cylinder 6. UK repair costs, causes and fixes for OBD2 fault code P0306. When this fault is detected, the ECU (Engine Control Unit) stores the code and usually illuminates the check engine light on the dashboard.
In practice, P0306 should be treated as a misfire and combustion problem first, not as proof that one named part has failed. The value of the code is in narrowing the system, checking related data, and avoiding the usual misdiagnosis before parts are ordered.
The primary symptom is an illuminated check engine light (malfunction indicator lamp) on your dashboard. Depending on the severity of the fault, you may also experience rough running, reduced fuel economy, or changes in engine performance. Some vehicles show no drivability symptoms at all — the warning light may be the only indication of a problem.
Fault code P0306 is triggered when the vehicle's ECU detects a reading or performance level outside the expected range for that system. P0306 indicates a misfire on cylinder 6. UK repair costs, causes and fixes for OBD2 fault code P0306. Common causes include sensor failure, wiring faults, mechanical issues, or secondary faults caused by another problem elsewhere in the vehicle. A full diagnostic scan should always be carried out to check for related fault codes before any parts are replaced.
The repair approach for P0306 depends entirely on the root cause identified during diagnosis. Always start by scanning for any related fault codes that might indicate the primary fault. Check wiring and connectors before replacing sensors or components. If the fault is sensor-related, replacement is usually straightforward. If the fault indicates a mechanical issue, a qualified mechanic should assess the vehicle before any work is carried out. After any repair, clear the code and road test to confirm the fix.
The typical UK cost to diagnose and repair fault code P0306 ranges from £60 to £400 including parts and labour at average UK workshop rates, including VAT. Costs vary significantly by vehicle make and model, and by region. Independent garages are typically 30–50% cheaper than franchised main dealers. Always get at least two quotes, and ask the garage to confirm the fault cause before authorising any repair.
P0306 is common on V6 and straight-six engines where rear-cylinder access can be awkward. The code still usually points to a local ignition, injector, or compression issue rather than a general ECU fault.
The error is blaming the harder-to-reach location for the fault itself. P0306 still needs the same isolate-and-swap logic as any cylinder misfire.
Fault code P0306 is likely to cause an MOT failure. Under current DVSA testing standards, an illuminated malfunction indicator lamp (MIL / check engine light) is an automatic MOT failure, regardless of whether the vehicle is otherwise roadworthy. This means you must resolve this fault before your MOT test.
Even if the light is not currently on, if the fault is intermittent it could reappear during the test. Use our AI Diagnostic Report to understand the MOT risk specific to your vehicle and get advice on whether it is safe to proceed to your test.
Specific to your vehicle — year, make, model and engine.
Includes step-by-step repair guide, exact UK labour costs and MOT impact.
Can I drive with fault code P0306?
Avoid driving — cylinder misfires can cause catalytic converter damage quickly.
Will P0306 clear itself?
Some fault codes will clear automatically after the underlying issue resolves itself, but P0306 typically stays stored until the fault is fixed and the code is manually cleared with an OBD-II scanner. Do not assume the problem has gone away if the light turns off temporarily.
Do I need a garage or can I fix P0306 myself?
Whether P0306 can be fixed at home depends on the root cause. Sensor replacements are often achievable for confident home mechanics. Mechanical or electrical faults usually require specialist tools and knowledge. Always get a full diagnosis before attempting any repair.
How much does it cost to fix P0306 in the UK?
UK repair costs for P0306 typically range from £60 to £400 depending on your vehicle, the root cause, and your local garage rates. Use our AI Diagnostic Report for a cost estimate specific to your car.
These fault codes are commonly found alongside P0306 or share similar causes:
Last updated: June 2026. AI-Diagnostics-Pro provides AI-generated information for educational purposes only. It is not a substitute for professional automotive advice. Always consult a qualified mechanic before carrying out vehicle repairs. Repair cost estimates are approximate and may vary by region and vehicle.
