P0336 indicates crankshaft position sensor a circuit range/performance. The exact repair depends on whether the underlying issue is a sensor fault, wiring problem, mechanical wear, or a related system problem on the vehicle being diagnosed.
This guide is reviewed against current UK fault-code usage patterns, MOT guidance, and indicative repair-cost context. It is educational guidance for P0336, not a substitute for live data, workshop testing, or a final quote.
This page explains the code in plain English and gives indicative UK repair and MOT context. It does not confirm the exact failed part. Vehicle age, engine, related codes, live data, and workshop inspection can all change the final diagnosis and quote.
P0336: crankshaft position sensor signal intermittent, can cause sudden cutout. Check wiring and connector first (£60-£300). When this fault is detected, the ECU (Engine Control Unit) stores the code and usually illuminates the check engine light on the dashboard.
In practice, P0336 should be treated as a misfire and combustion problem first, not as proof that one named part has failed. The value of the code is in narrowing the system, checking related data, and avoiding the usual misdiagnosis before parts are ordered.
These are the most common symptoms UK drivers report when this code is active:
Note that some vehicles show no drivability symptoms at all — the check engine light may be the only sign. This is why scanning the fault code is essential rather than guessing at the cause.
These are typical causes to check first:
It is important to diagnose the root cause before replacing parts. Many unnecessary and expensive repairs happen because the most expensive component is replaced first without proper testing. Always work through the diagnostic steps systematically.
Work through these steps in order to avoid unnecessary parts replacement:
After any repair, clear the fault code with an OBD-II scanner and carry out a test drive. If the code returns, continue to the next diagnostic step. For a personalised repair guide specific to your vehicle's make, model, year and engine, use our AI Diagnostic Report below.
These models are frequently seen with this fault code in UK garages:
This code can appear on OBD-II compatible vehicles. OBD-II is standard on most UK petrol cars from 2001 and diesel cars from 2004, with many later-1990s vehicles also compatible. The models listed above are examples where owners and garages often encounter this fault, but they are not an exhaustive or ranked list.
Difficulty: Medium — intermittent faults can be tricky to diagnose. Sensor replacement is usually straightforward.
UK repair cost estimate: £60–£300 including parts and labour at average UK workshop rates (inc. VAT). Independent garages are typically 30–50% cheaper than main dealers. Always get at least two quotes.
Prevention: Keep connectors clean and dry, include sensor inspection in high-mileage servicing.
P0336 is the crank sensor range/performance fault, so signal quality matters as much as signal presence. Damaged reluctor teeth, poor air gap, or intermittent wiring can all create this code.
Replacing the sensor alone can miss a reluctor or air-gap problem that creates the same performance fault.
Fault code P0336 does not directly cause an MOT failure on its own, but it can still cause a failure if it keeps the check engine light (MIL) on where MIL inspection applies, or affects emissions.
Even if the light is not currently on, if the fault is intermittent it could reappear during the test. Use our AI Diagnostic Report to understand the MOT risk specific to your vehicle and get advice on whether it is safe to proceed to your test.
This guide is informed by the following authoritative UK sources:
Repair cost estimates are based on UK labour rates and parts pricing from AA, RAC and independent garage surveys, reviewed quarterly. All content is for educational purposes and is not a substitute for professional mechanical diagnosis.
Specific to your vehicle — year, make, model and engine.
Includes step-by-step repair guide, exact UK labour costs and MOT impact.
What does P0336 mean in plain English?
P0336 is a misfire and combustion fault code. In practice, P0336 should be treated as a misfire and combustion problem first, not as proof that one named part has failed. The code helps narrow the system, check related data, and avoid misdiagnosis before parts are ordered.
Will P0336 fail an MOT?
P0336 does not automatically fail an MOT on its own, but the underlying fault can still cause a failure if it affects safety, warning lights, or emissions.
Can I keep driving with P0336?
Avoid driving if possible — intermittent crank sensor faults can cause sudden engine cutout.
How much does it usually cost to fix P0336 in the UK?
Typical UK repair costs for P0336 range from £60–£300, depending on the underlying fault, your exact vehicle, and local labour rates.
Use these supporting pages to compare likely repair paths, warning-light behaviour, MOT risk, and the questions to ask before approving work.
Compare P0336 with closely related faults, nearby codes in the same family, and adjacent module or sensor faults that often need to be ruled out during diagnosis.
Last updated: August 2026. AI-Diagnostics-Pro provides AI-generated information for educational purposes only. It is not a substitute for professional automotive advice. Always consult a qualified mechanic before carrying out vehicle repairs. Repair cost estimates are approximate and may vary by region and vehicle.